Module 8: Wood Utilization and Technology

Results

This person got 9 of 10 possible points.
Total score: 90 %

Question Results

Score 1 of 1

Question:

It is usually better to produce more than one roundwood product, when cutting your woodlot.

Response:

True

False

Score 1 of 1

Question:

Hardwood veneer logs must be at least 10 inches, inside bark on the small end.

Response:

True

False

Score 0 of 1

Question:

Grade 1 hardwood sawlogs must be at least 11 inches, inside bark on the small end.

Response:

True

False

Score 1 of 1

Question:

Red spruce is the species most favoured for poles.

Response:

True

False

Score 1 of 1

Question:

To determine average height of pile in stacked pulpwood, heights should be measured every 5 feet.

Response:

True

False

Score 1 of 1

Question:

A board foot equals a section 1-ft long, by 1-ft wide, by 1-ft thick.

Response:

True

False

Score 1 of 1

Question:

Weevil damage is one of the most serious defects in white pine trees and logs.

Response:

True

False

Score 1 of 1

Question:

Sweep and crook are not important in softwood sawlogs.

Response:

True

False

Score 1 of 1

Question:

In bucking up a tree stem, jump cutting should be done every 4 feet.

Response:

True

False

Score 1 of 1

Question:

In bucking up a tree stem, heavy rot shown by a canker, for example, should not be placed in the centre of the log.

Response:

True

False